APPLICATION
Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.
USAGE DIRECTIONS
- Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
- Apply 3-4 coats, allowing product to dry completely between applications.
- Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
- Let dry before driving vehicle
COVERAGE
Approximately 6-12 sq. ft. per can.
FOR BEST RESULTS
Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.
REMOVAL
Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.
